Contact us Privilege Program Installation

Stand alone protector

As it's name implies, these 16'' high protectors are not attached to the posts, and so they can fit any welded, bolted or 4.0'' face frames.  Two side rails can be connected to two protectors to act as an end of row protector.  Four (4) 1/2'' x 3 3/4'' anchors (billed separately) for each protector.

 

This is the most flexible frame option.  Frames can be shipped assembled or knocked-down.  Different material finishes are available for posts and bracings. Also, damaged components can be replaced on site.  Standard required hardware per frame : 2x Anchors 1/2''x 4 1/4'', 3x Shims 4.5''x5.5''.

Welded frames for racking are the most common in North America.  14 gage thickness bracings are welded to the racking post every 42". The 4"x3" racking post has the better capacity.  Standard required hardware per frame : 2x Anchors 1/2"x 4-1/4", 3x Shims 4.5"x5.5".

Welded racking frames are the most common in North America. 14 gage thickness bracings are welded to the racking post every 42". Racking post is available in a range of steel thickness (gage) depending on weight requirements.  Standard required hardware per frame : 2x Anchors 1/2" x 4 1/4", 3x Shims 3.5"x4.5".

As it's name implies, these 16'' high protectors are not attached to the posts, and so they can fit any welded, bolted or 4.0'' face frames.  Two side rails can be connected to two protectors to act as an end of row protector.  Four (4) 1/2'' x 3 3/4'' anchors (billed separately) for each protector.